DS-3T1310P-SI/HS Switch PoE 8- portowy, 10/100 Mbps Inteligentne przełączniki zarządzane zostały opracowane przez firmę Hikvision i charakteryzują się łatwym zarządzaniem i konserwacją. Możesz łatwo wdrożyć, monitorować i rozbudowywać system nadzoru w dowolnym miejscu i czasie za pomocą platform oprogramowania Hikvision. Można przeglądać topologię sieci, monitorować stan sieci i odbierać alarmy urządzeń w czasie rzeczywistym, co znacznie obniża koszty eksploatacji i konserwacji. Cechy: Wizualne zarządzanie topologią. Monitor stanu sieci. Funkcje warstwy 2: PoE watchdog, STP/RSTP, VLAN, SNMP, QoS, ERPS, itp. Stopień ochrony IP40 z ochroną przed włamaniami i wilgocią. Szeroki zakres temperatur od -30°C do 65°C w trudnych warunkach środowiskowych. Specyfikacja: General Shell Metal material Net Weight 0.6 kg (1.3 lb) Gross Weight 1.2 kg (2.6 lb) Dimensions (W × H × D) 197.00 mm × 114.20 mm × 42.20 mm (7.70'' × 4.40'' × 1.60'') Operating Temperature -30 °C to 65 °C (-22 °F to 149 °F) Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F) Operating Humidity 5% to 95% (no condensation) Relative Humidity 5% to 95% (no condensation) Power Supply Power adapter: 48 V DC (working temperature: 0 °C to 45 °C); Grounding terminal: 48-57 V DC (working temperature: -30 °C to 65 °C) Installation Mode Desk-Mounted,Rail Max. Power Consumption 120 W Power Consumption in Idle 5 W Surge Protection 6 kV Network Parameters Ports 8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port MAC Address Table 16 K Switching Capacity 9.2 Gbps Packet Forwarding Rate 6.84 Mpps Internal Cache 4 Mbits PoE Power Supply PoE Standard IEEE 802.3af,IEEE 802.3at PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) PoE Port PoE: Ports 1 to 8 Max. Port Power 30 W PoE Power Budget 110 W Software Function Long Range Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition. Port Isolation Ports 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group PoE Watchdog Ports 1 to 8: auto detect and restart the cameras that do not respond. QoS QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode. VLAN VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN. HPP Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device System Maintenance Support remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP/RSTP/ERPS Approval EMC FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015) Safety UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017) Chemistry CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)